4.6.2.7.3 RADIUS Details
RADIUS Authentication Statistics for Server
Access Accepts: The number of RADIUS Access-Accept packets (valid or invalid) received from the server.
Access Rejects: The number of RADIUS Access-Reject packets (valid or invalid) received from the server.
Access Challenges: The number of RADIUS Access-Challenge packets (valid or invalid) received from the server.
Malformed Access Responses: The number of malformed RADIUS Access-Response packets received from the server.
Malformed packets include packets with an invalid length. Bad authenticators or Message Authenticator attributes or
unknown types are not included as malformed access responses.
Bad Authenticators: The number of RADIUS Access-Response packets containing invalid authenticators or Message
Authenticator attributes received from the server.
Unknown Types: The number of RADIUS packets that were received with unknown types from the server on the
authentication port and dropped.
Packets Dropped: The number of RADIUS packets that were received from the server on the authentication port and
dropped for some other reason.
Access Requests: The number of RADIUS Access-Request packets sent to the server. This does not include
retransmissions.
Access Retransmissions: The number of RADIUS Access-Request packets retransmitted to the RADIUS authentication
server.
Pending Requests: The number of RADIUS Access-Request packets destined for the server that have not yet timed out or
received a response. This variable is incremented when an Access-Request is sent and decremented due to receipt of an
Access-Accept, Access-Reject, Access-Challenge, timeout, or retransmission.
Timeouts: The number of authentication timeouts to the server. After a timeout, the client may retry to the same server,
send to a different server, or give up. A retry to the same server is counted as a retransmit as well as a timeout. A send to
a different server is counted as a Request as well as a timeout.
IP Address: IP address and UDP port for the authentication server in question.
State: Shows the state of the server. It takes one of the following values:
To Next Page
Loading...
Need help?
General
