9.2 Chemical resistance
C
a
rtridges
The Ignite and Ignite+ cartridges are composed of non-toxic cyclo olefin polymer
(COP), which offers good resistance to a wide range of temperatures and chemicals,
including acids and bases.
A list of chemicals to which COP exhibits good chemical resistance is provided below:
NOTICE
Ch
emicals not on this list can be validated by the user under condi-
tions representative of the intended use. However, take caution
with oils and solvents of low polarity.
Chemical Usage
Acetone
Solvent
Acetic acid 99%
Aqueous solution
Ammonia 28%
Aqueous solution
Dimethyl sulphoxide (DMSO)
Solvent
DMF (N,N-dimethylformamide) Solvent
Ethyl alcohol
Solvent
Fluorinated oil Solvent
Formadide 50% Aqueous solution
Glycerine
Aqueous solution
Hydrochloric acid 35%
Aqueous solution
Isopropyl alcohol
Solvent
Methyl alcohol
Solvent
Methyl cellosolve
Solvent
Methyl phenyl silicon oil
Solvent
Polyethylene glycol 50% (PEG4000S) Aqueous solution
Saline Aqueous solution
Sodium hydroxide, NaOH
Aqueous solution
Sulfuric acid 95% Aqueous solution
Tween 20 10%
Aqueous solution
9 Reference information
9.
2 Chemical resistance
NanoAssemblr Ignite and Ignite+ Operating Instructions NIN1134 AA 115
To Next Page
Loading...
