cytiva NanoAssemblr Ignite - About this Manual

1.2 About this manual
I
n
troduction
This section contains information about the purpose and scope of this manual, notes
and tips, and typographical conventions.
Purpose of this manual
This manual provides information needed to install, operate and maintain the product
in a safe way.
Scope of this manual
This manual is valid for the NanoAssemblr Ignite and Ignite+ systems, and covers the
Ignite and Ignite+ instruments, embedded software, and accessories.
Notes and tips
Note:
A note is used to indicate information that is important for trouble-free and
op
timal use of the product.
Tip:
A tip contains useful information that can improve or optimize your proce-
dures.
Typographical conventions
So
ftware items are identified in the text by bold italic text.
Hardware items are identified in the text by bold text.
Text that the user must either type exactly as shown in the manual, or that the software
displays as a response (not a regular part of the graphic user interface), is shown by a
monospaced typeface (for example, Recipe Information).
Tip:
The text can include clickable hyperlinks to reference information.
1 Introduction
1.
2 About this manual
NanoAssemblr Ignite and Ignite+ Operating Instructions NIN1134 AA 6