cytiva NanoAssemblr Ignite - Electrical Connections; Connect Power to the Instrument

4.4 Electrical connections
I
n
troduction
This section shows the electrical connections that must be made to the product. If the
product is moved within the lab or to another building, the product has to be recon-
nected to electrical power and network (optional).
Safety precautions
WARNING
Power cord. Only use power cords with plugs delivered or
approved by Cytiva.
WARNING
Su
pply voltage. Before connecting the power cord, make sure
that the supply voltage at the wall outlet corresponds to the
requirements for the instrument.
Connect power to the instrument
Fo
llow the instructions below to connect power to the NanoAssemblr Ignite or Ignite+
instrument.
WARNING
Pr
otective ground. To reduce the risk of electric shock, this
equipment must always be connected to a grounded power outlet.
4 Installation
4.
4 Electrical connections
NanoAssemblr Ignite and Ignite+ Operating Instructions NIN1134 AA 53