6.1 Safety precautions
WARNING
Al
ways use appropriate Personal Protective Equipment (PPE)
during operation and maintenance of this product.
WARNING
Ha
zardous substances and biological agents. When using
hazardous chemical or biological agents, take all suitable protec-
tive measures, such as wearing protective clothing, glasses and
gloves resistant to the substances used. Follow local and national
regulations for safe operation and maintenance of this product.
CAUTION
Ho
t surface. Avoid direct contact with the heating block and the
top surface of the rotating block during or after heating. Contact
with hot surfaces during or directly after a procedure in which the
heaters are on can cause burns.
6 Operation
6.
1 Safety precautions
NanoAssemblr Ignite and Ignite+ Operating Instructions NIN1134 AA 76
To Next Page
Loading...
