cytiva NanoAssemblr Ignite - Specifications; Technical Specification

9.1 Specifications
I
n
troduction
This section describes the specifications for the product.
Technical specification
Parameter Specification
Supply voltage 100 to 240 V AC
Frequency 50/60 Hz
(W × D × H) 38 × 34 × 38 cm (15 × 13.4 × 15 in)
Weight 16 kg (35.3 lb)
Syringe compatibility
Th
e Ignite and Ignite+ systems are designed to be used with specific syringes. The table
below gives the product name and compatible sizes for syringes.
Product Compatible sizes
BD Luer-Lok syringes (centered tip) 3, 5, 10, 20, 30 mL
BD Slip Tip syringes (centered tip) 1, 3, 5, 10, 20, 30 mL
B. Braun Injekt Luer Solo or Luer-Lock Solo syringes
(c
entered tip)
1, 2
*
, 5, 10, 20 mL
B. Braun Omnifix Luer Solo or Luer-Lock Solo syringes
(centered tip)
1, 3, 5, 10, 20, 30 mL
Terumo Luer Lock or Luer Slip hypodermic syringes
(centered tip)
1, 2.5
*
, 3, 5, 10, 20, 30 mL
Shinva Ande syringes 1, 2, 5, 10 mL
KDL syringes 1, 2, 5, 10 mL
WEGO syringes 2, 5, 10 mL
KOVAX syringes 1 mL
* Not compatible with heating accessories. Must be used with syringe extenders for
op
timal performance in all other cases
Consult the manufacturer of the syringes for chemical compatibility.
9 Reference information
9.
1 Specifications
NanoAssemblr Ignite and Ignite+ Operating Instructions NIN1134 AA 112