cytiva NanoAssemblr Ignite - Start-Up and Shutdown; Start the Instrument

6.2 Start-up and shutdown
I
n
t
roduction
This section describes how to start and shut down the instrument.
Start the instrument
To start the instrument, press the power switch on the back of the instrument to the I
position.
When the instrument starts, the following occurs:
• The
user interface and status indicator are illuminated.
• When the system is ready to use, the user interface displays the main menu.
6 Operation
6
.
2
Start-up and shutdown
NanoAssemblr Ignite and Ignite+ Operating Instructions NIN1134 AA 77