cytiva NanoAssemblr Ignite - Important User Information; Intended Use of the Product

1.1 Important user information
I
n
troduction
This section contains important user information about the product and this manual.
Read this before operating the
product
All users must read the entire Op
erating Instructions before installing, oper-
ating, or maintaining the product.
Always keep the Operating Instructions at hand when operating the product.
Do not install, operate, or perform maintenance on the product in any other way than
described in the user documentation. If you do, you can be exposed or expose others to
hazards that can lead to personal injury and you can cause damage to the equipment.
Intended use of the product
NanoAssemblr™ Ignite™ and NanoAssemblr Ignite+™ are intended for the production
of nanoparticle formulations for research purposes. The products are intended to be
used by trained laboratory staff members in research laboratories within academia
and industry.
While the functionality of the two products is the same, the Ignite+ instrument can
formulate volumes and flow rates larger than the Ignite instrument.
The products are intended for research and further manufacturing use only, and must
not be used in any clinical procedures, or for diagnostic purposes.
1 Introduction
1
.
1 Important user information
NanoAssemblr Ignite and Ignite+ Operating Instructions NIN1134 AA 5