Step Action
Note:
Sy
ringe types that are not compatible with the heater appear dimmed when
the heating insert is present.
3 Tap the empty box next to a syringe name to add the syringe to the list of
av
ailable syringes.
4 Tap the blue box next to a syringe name to remove the syringe type from the
list of available syringes.
5 Tap the back arrow at the top left of the screen to apply the settings.
5 Preparation
5.
1 Parameters
5.1.1 Syringe selection
NanoAssemblr Ignite and Ignite+ Operating Instructions NIN1134 AA 58
To Next Page
Loading...
