DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet User Manual
167
Figure 7- 6 Access Profile Detail Information window (Ethernet)
To return to the Access Profile List window, click Show All Profiles. To add a rule to a previously configured entry,
click on the corresponding Add/View Rules on the Access Profile List window. This will reveal the following window:
Figure 7- 7 Access Rule List window
To add an access rule, click the Add Rule button on the Access Rule List window above. The following window
opens:
Figure 7- 8 Add Access Rule window (Ethernet)
To set the Access Rule for Ethernet, adjust the following parameters and click Apply.
Parameter Description
Access ID (1-128) Type in a unique identifier number for this access. This value can be set from 1 to 128.
Auto Assign – Ticking this check box will instruct the Switch to automatically assign an Access ID
for the rule being created.
VLAN Mask
Allows the entry of a VLAN Mask for a previously configured VLAN.
VLAN ID
Allows the entry of a VLAN ID for a previously configured VLAN.
To Next Page
Loading...
