D-Link DWC-2000 User Manual 144
Section 5 - Advanced Network Conguration
Congure IPv6 Static Routing
Path: Network > Routing > IPv6 Static Routing
Manually adding static routes to this device allows you to dene the path selection of trac from one interface
to another. There is no communication between this controller and other devices to account for changes in the
path; once congured the static route will be active and eective until the network changes.
The List of Static Routes displays all routes that have been added manually by an administrator and allows several
operations on the static routes. The List of IPv4 Static Routes and List of IPv6 Static Routes share the same elds
(with one exception):
To congure IPv6 Static Routing:
1. Go to Network > Routing > IPv6 Static Routing.
2. Click Add New IPv6 Static Route.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
