D-Link DWC-2000

D-Link DWC-2000 User Manual 244
Section 8 - Maintenance
2. Set the security level.
• noAuthnoPriv: only requires a username match for authentication
• authNoPriv: Provides authentication based on the MD5 or SHA algorithms.
• authPriv: Provides authentication based on the MD5 or SHA algorithms as well as encryption
privacy with the DES 256-bit standard.
3. Click Save.
2. Click Add SNMP Trap.
3. Complete the information on elds (refer to the table below).
4. Click Save.
Congure SNMP Trap List
1. Go to Maintenance > Management > SNMP > SNMP Trap List tab.
Field Description
IP Address The IP Address of the SNMP trap agent.
Port
The SNMP trap port of the IP address to which the trap messages will
be sent.
Community
The community string to which the agent belongs. Most agents are
congured to listen for traps in the Public community.
Authentication Type The SNMP version used by the trap agent. The choices are v1, v2c, or v3.