D-Link DWC-2000 User Manual 82
Section 4 - Advanced WLAN Conguration
Congure AP Debug Mode
Path: Wireless > Access Point > Managed APs List > Managed APs
When the AP is in Managed mode, remote access to the AP is disabled. However, you can enable Telnet access by
enabling the Debug feature on the Managed APs page.
1. Click Wireless > Access Point > Managed APs List > Managed APs tab
2. Right-click on one of the entries and select Debug.
3. Toggle Enable Debug to On.
4. Click Save.
To Next Page
Loading...
