D-Link DWC-2000 User Manual 78
Section 4 - Advanced WLAN Conguration
Managed APs
The managed AP information stores in controller local database. You can add/delete, change power/channel, or
change the AP prole individually.
The Wireless Global Conguration page contains a eld to select whether to use a local or RADIUS database for
AP Validation. The Valid Access Point List page contains information about APs congured in the local database.
If the AP Validation is set to RADIUS, information about the APs to be managed by the controller must be added
to the external RADIUS database.
Add a Valid AP
1. Click Wireless > Access Point > Managed APs List > Valid AP tab.
2. Click Add New Valid AP.
3. Complete the elds on the next page and click Save.
Note: To add or delete an AP from the valid AP list, right-click the access point and select Edit or Delete.