D-Link DWC-2000 User Manual 27
Section 3 - Basic Conguration
Step #3: Select APs to be Managed
The wireless controller automatically discovers managed and unmanaged access points on the WLAN that are
in the same IP subnet. Use the following procedure to select the access points that the wireless controller will
manage.
1. Click Wireless > Access Point > Discovered AP List. The Discovered AP List page will appear with a list
of access points that the wireless controller has discovered.
2. Under Discovered AP List, right-click on the access point you want the wireless controller to manage
and select Manage.
3. Complete the elds in the Manage AP page (refer to the next page) and click Save. When the
conrmation appears, click OK.