D-Link DWC-2000

D-Link DWC-2000 User Manual 37
Section 3 - Basic Conguration
Step #7: Congure Captive Portal Settings
Conguring the wireless controller’s captive portal settings with local database is a 4-step process:
1. Create a captive portal group
a. Go to Security > Authentication > User Database > Groups. The Groups List page will appear.
b. Click Add New Group. The Group Conguration page will appear.
c. Complete the elds in the table below and click Save.
Field Description
Group Name Enter a name for the group.
Description Enter a description of the group.
Captive Portal User Enable this option under User Type.