D-Link DWC-2000 User Manual 260
Section 10 - Troubleshooting
Using Diagnostic Tools on the Wireless Controller
Ping an IP Address
Path: Maintenance > Management > Diagnostics > Network Tools
As part of the diagnostics functions on the wireless controller, you can ping an IP address. You can use this
function to test connectivity between the wireless controller and another device on the network connected to
the wireless controller.
1. Go to Maintenance > Management > Diagnostics > Network Tools.
2. Under Command Output for Ping and Traceroute, in the IP Address / Domain Name eld, enter an IP
address or domain name.
3. Click Ping. The results will appear in the Command Output display below.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
