D-Link DWC-2000 User Manual 261
Section 10 - Troubleshooting
Using Traceroute
Path: Maintenance > Management > Diagnostics > Network Tools
The wireless controller provides a Traceroute function that lets you map the network path to a public host. Up
to 30 intermediate controllers (or “hops”) between this wireless controller and the destination will be displayed.
1. Go to Maintenance > Management > Diagnostics > Network Tools.
2. Under Command Output for Ping and Traceroute, in the IP Address / Domain Name eld, enter an IP
address or domain name.
3. Click Traceroute. The results will appear in the Command Output display below.
To Next Page
Loading...
