D-Link DWC-2000

D-Link DWC-2000 User Manual 24
Section 3 - Basic Conguration
Basic Conguration Procedures
To perform common basic conguration procedures, follow the steps below:
• “Step #1: Enable DHCP Server (Optional)” on page 25
• “Step #2: Congure Country Code” on page 26
• “Step #3: Select APs to be Managed” on page 27
• “Step #4: Change the SSID and Set Up Security” on page 29
• “Step #5: Select MAC Authentication Mode” on page 34
• “Step #6: Conrm Access Point Prole is Associated” on page 36
• “Step #7: Congure Captive Portal Settings” on page 37
• “Step #8: Use SSID with RADIUS Sever as Authenticator” on page 45
• “Step #9: Congure Guest Management” on page 46
• “Step #10: Congure a BYOD Environment” on page 53