D-Link DWC-2000 User Manual 252
Section 8 - Maintenance
Rebooting the Wireless Controller
Path: Maintenance > Firmware > Soft Reboot
You can reboot the wireless controller. Rebooting performs a power cycle and keeps any customized overrides
you made to the default settings.
1. Go to Maintenance > Firmware > Soft Reboot.
2. Next to Soft Reboot, click Soft Reboot. To reboot to the original factory default, click Default.
3. At the conrmation message, click OK to reboot the wireless controller or click Cancel to not reboot.
To Next Page
Loading...
