D-Link DWC-2000

D-Link DWC-2000 User Manual 249
Section 8 - Maintenance
Backup Conguration Settings
Path: Maintenance > Firmware > Backup/Restore
After you congure the wireless controller as desired, back up the conguration settings. When you back up the
settings, they are saved as a le. You can then use the le to restore the settings on the same wireless controller if
something goes wrong or on a dierent wireless controller that will replace or work with other wireless controllers.
1. Click Maintenance > Firmware > Backup/Restore.
2. Click Save from System (PC), Save from USB Port 1, or Save from USB Port 2, depending on the
location the backup should be saved to.
A. If Save from System (PC) is chosen, a dialog box message will appear. Afterwards the browser will
automatically begin the download to the default download location.
B. If Save from USB Port 1, or Save from USB Port 2 is chosen, the le will immediately be backed up
to the corresponding USB ash drive without further prompts. If no USB ash medium is present,
these options will do nothing.