D-Link DWC-2000 User Manual 248
Section 8 - Maintenance
Field Description
TSPEC Traps
If you enable this eld, the SNMP agent sends a trap when the following TSPEC‐
related events occur:
• An authorized WMM client is repeatedly using more bandwidth than was
allocated for its trac stream.
• A WMM‐enabled client is sending prioritized trac without authorization to use
admission controlled resources.
WIDS Status Traps
If you enable this eld, the SNMP agent sends a trap for one of the following reasons:
• This controller has become Cluster Controller
• Rogue Client detected
• Rogue Client(s) continue to exist, after every Rogue Detected Trap Interval
seconds
• Maximum number of Managed APs in the peer group exceeded.
Wireless Status Traps
If you enable this eld, the SNMP agent sends a trap if the operational status of the
controller (it need not be Cluster Controller for this trap) changes. It sends a trap if
the Channel Algorithm is complete or the Power Algorithm is complete. It also sends
a trap if any of the following databases or lists has reached the maximum number
of entries:
• Managed AP database
• AP Neighbor List
• Client Neighbor List
• AP Authentication Failure List
• RF Scan AP List
• Client Association Database
• Ad Hoc Clients List
• Detected Clients List
To Next Page
Loading...
Need help?
General
Weight and Dimensions
