D-Link DWC-2000

D-Link DWC-2000 User Manual 210
Section 7 - Viewing Status and Statistics
Path: Status > Wireless Information > Controller Status > Peer Controller Sent Status
You can push portion of the controller conguration from one controller to another controller in the cluster. The
Peer Controller Sent Status page display information about the conguration sent by a peer controller in the
cluster. It also identies the IP address of each peer controller that receive the conguration information.
Peer Controller Sent Status
Field Description
Peer Controller IP Address
Shows the IP address of each peer wireless controller in the cluster that
received conguration information.
Conguration Controller IP Address Shows the IP Address of the controller that sent the conguration information.
Conguration
Identies which parts of the conguration the controller received from the
peer controller.
Timestamp
Shows when the conguration was applied to the controller. The time is
displayed as UTC time and therefore only useful if the administrator has
congured each peer controller to use NTP.