D-Link DWC-2000 User Manual 265
Section 10 - Troubleshooting
Log Settings
The wireless controller lets you capture log messages. You can monitor the type of trac that goes through the
wireless controller and be notied of potential attacks or errors when they are detected by the controller. The
following sections describe the log conguration settings and the ways you can access these logs.
Dening What to Log
Path: Maintenance > Logs Settings > Facility Logs
The Facility Logs page lets you determine the granularity of logs to receive from the wireless controller. Select
one of the following facilities:
• Kernel = the Linux kernel. Log messages that correspond to this facility would correspond to trac
through the rewall or network stack.
• System = application and management-level features available on this wireless controller for managing
the unit.