D-Link DWC-2000

D-Link DWC-2000 User Manual 93
Section 4 - Advanced WLAN Conguration
Congure AP Prole SSID
Path: Wireless > Access Point > AP Prole> AP Prole SSID
The AP Prole SSID List page displays the virtual access point (VAP) settings associated with the selected AP
prole. Each VAP is identied by its network number and Service Set Identier (SSID). You can congure and
enable up to 16 VAPs per radio on each physical access point.
1. Click Wireless > Access Point > AP Proles > AP Proles SSID tab.
2. Select the AP Prole from the drop-down menu.
3. Select the Radio Mode (either 802.11a/n or 802.11b/g/n).
4. Select the SSID name from the drop-down menu.
5. Enable/disable the SSID by right-clicking Enable or Disable.
Note: SSID ID 1 is always enabled. If you do not want to have the rst SSID enabled, you must
create a new SSID to be able to swap another SSID in the rst slot.