D-Link DWC-2000 User Manual 98
Section 4 - Advanced WLAN Conguration
SSID Proles
The SSID Prole list shows all the wireless networks congured on the controller. The rst 16 networks are cre-
ated by default. You can modify the default networks, but you cannot delete them. You can add and congure up
to 16 additional networks for a total of 50 wireless networks. Multiple networks can have the same SSID.
Congure SSID Proles
Path: Wireless > Access Point > SSID Proles
1. Click Wireless > Access Point > SSID Proles. The SSID Prole List page will appear.
2. To edit an existing SSID, right-click it and select Edit. To create a new SSID Prole, click the Add New
SSID Prole button.
Note: SSID ID 1 is always enabled. If you do not want to have the rst SSID enabled, you must
create a new SSID to be able to swap another SSID in the rst slot.