D-Link DWC-2000

D-Link DWC-2000 User Manual 149
Section 5 - Advanced Network Conguration
2. Toggle Activate QoS on LAN to ON.
3. On the middle menu on the LAN QoS Priority page, click the Trust Mode Settings tab. In the Trust
Mode List, select a port by right-clicking it and clicking Edit. This brings up a pop-up box called Trust
Mode Conguration.
4. Type in the port number for LAN Port and select either CoS or DSCP next to Classify Using.
5. Click Save.
6. Proceed to “Conguring DSCP Priority” on page 152 or “Conguring 802.1p Priority” on page 151 to
congure values for DSCP and CoS and their priority.