D-Link DWC-2000 User Manual 30
Section 3 - Basic Conguration
3. Complete the Security elds on the SSID Prole Conguration page.
Field Description
SSID
Enter the case-sensitive name of the wireless network. Be sure the SSID is the same for all device in
your wireless network.
VLAN
Enter a VLAN ID. Be sure this VLAN ID had been created on VLAN Setting (Network > VLAN > VLAN
Setting).
Security
The default access point prole does not use any security mechanism. To protect your network,
we recommend you select a security mechanism to prevent unauthorized wireless clients from
gaining access to your network. Choices are:
• None = no security mechanism is used.
• WEP = enable WEP security. Complete the options in Table 3-1.
• WPA/WPA2 = enable WPA/WPA2 security. Complete the options in Table 3-2.
Field Description
Security
• Static WEP = uses static key management. You manually congure the same keys to
encrypt data on both the wireless client and the access point. Dynamic WEP (WEP IEEE
802.1x) uses dynamically generated keys to encrypt client-to- access point trac.
• WEP IEEE 802.1X = screen refreshes, and there are no more elds to congure. The access
point uses the global RADIUS server or the RADIUS server you specied for the wireless
network.
Authentication
Select the authentication type. Choices are:
• Open System = any wireless station can request authentication. The station that needs to
authenticate with another wireless station sends an authentication management frame
that contains the identity of the sending station. The receiving station returns a frame that
indicates whether it recognizes the sending station.
• Shared Key = each wireless station is assumed to have received a secret shared key over
a secure channel that is independent from the 802.11 wireless network communications
channel.
WEP Key
Select the key type. Choices are:
• ASCII = upper- and lower-case alphabetic letters, numeric digits, and special symbols
such as @ and #.
• HEX = digits 0 to 9 and letters A to F.
WEP Key
Length (bits)
Select the length of the WEP key. Choices are:
• 64 = 64 bits
• 128 = 128 bits
Tx
Transfer Key Index. Indicates which WEP key the access point uses to encrypt the data it
transmits. To select a transfer key, click the button in front of the key number and the eld
where you enter the key.
WEP Keys
You can specify four WEP keys. In each text box, enter a string of characters for each of the
RC4 WEP keys shared with the stations using the access point. Use the same number of
characters for each key. The number of keys you enter depends on the WEP Key Type and
WEP Key Length selections. The following list shows the number of keys to enter in the eld:
• 64 bit = ASCII: 5 characters; Hex: 10 characters
• 128 bit = ASCII: 13 characters; Hex: 26 characters
Each client station must be congured to use one of these WEP keys in the same slot as
specied here.
Table 3-1 WEP Page Settings
To Next Page
Loading...
Need help?
General
Weight and Dimensions
