Daedong EX50-SA - Stopping the Engine

5
-
8
EX50-SA / EX55-SA / EX5310-AU / EX5810-AU
STOPPING THE ENGINE
1. Make sure to reduce the engine
rpm before stopping the engine.
2. Depress the clutch pedal and put
all shift levers in the neutral posi-
tion.
3. Run the engine at the idle speed
for approx. 2 to 3 minutes, and
then turn the key switch to the
"OFF" position to stop the engine.
4. Remove the ignition key.
T66O120A

Turn off all the electrical de-
vices and remove the ignition
key before leaving the tractor.

Also, be careful not to lose the
ignition key as the keys used
for all KIOTI tractors are the
same in shape.

The horn, turn signal lamp and
hazard lamp can be operated
without the key inserted. How-
ever, using these components
without the engine started can
discharge the battery.
IMPORTANT

Never touch the mufer or hot
covers until they are cooled
down after running the engine
or driving the tractor.
WARNING

This vehicle is equipped with
a turbocharged engine. Avoid
high RPM, abrupt acceleration
and sudden start immediately
after starting the engine. Also,
idle the engine for approx. 2
minutes before driving.

Also, before stopping the
engine, idle the engine for ap-
prox. 2 to 3 minutes.

The engine and turbocharger
can be damaged prematurely
unless idling the engine for a
certain period right after it is
started and right before it is
stopped.
IMPORTANT
TE150 (EX50, EX55)-���-05.indd 8 2019-03-19 �� 7:03:15