Daedong EX50-SA - Foot Throttle; Hand Throttle Lever

4
DESCRIPTION OF OPERATING SYSTEM
4
-
25
TE5O412A
FOOT THROTTLE
The foot throttle is mainly used
during driving on a road while the
hand throttle lever is mainly used
whileworkingonaeld.
(1) Foot Throttle (2) Hand Throttle Lever
•
For heavy load job, such as
front end loader operation,
use low or medium speed of
the range shift lever.
IMPORTANT
•
If the ignition key is turned ON
or the engine is started while de-
pressing the forward or reverse
driving pedal, the CAL lamp
turns on and forward or reverse
driving is disabled for safety.
This restriction is automatical-
ly canceled when keeping the
forward or reverse driving pedal
released for 1 second.
However, if the lamp is still illu-
minated, contact
KIOTI
dealer.
NOTE
HAND THROTTLE LEVER
The hand throttle lever is to control
the engine rpm. The engine accel-
erates to its full speed by pulling the
hand throttle lever ( position) com
pletely out while pushing the lever
( position) decelerates the en-
gine.
The hand throttle lever is mainly
usedwhileworkingonaeld.
(1) Hand Throttle Lever (2) Foot Throttle
INCREASE DECREASE
T46O564A
TE150 (EX50, EX55)-���-04.indd 25 2019-03-19 �� 6:58:30