Daedong EX50-SA - Tread

EX50-SA / EX55-SA / EX5310-AU / EX5810-AU
4
-
34
•
Do not weld or apply heat to
the tire rim or disc. The tire
can explode due to the rapidly
increased pressure in the tire.
•
Check tires for ination pres-
sure, damage, deformation,
and excessive wear on lug and
damage of rim and disc. Also
check if wheel bolts, rim bolts,
and nuts are loose.
WARNING
T46W031A
TREAD
(1) Bolt (2) Rim Bolt (3) Disc
H23O4D0A
Whenworkingonaeldwherecropsarelinearlyaligned,thetreadshouldbe
adjusted so that the tires do not cross over the crops.
It is also necessary to widen wheel tread to decrease danger when working on
slopes or hills, or when doing trailer work, etc.
Never operate tractor with a loose rim, wheel, or axle.
•
Always tighten nuts or bolts to the specied torque.
•
Make sure to frequently check that all these parts are rmly tightened.
•
Make sure to perform inspection daily.
WARNING
TE150 (EX50, EX55)-���-04.indd 34 2019-03-19 �� 6:58:35