7
-
33
111
A
B
CA
B
C
(1) Plug
DRAINING WATER FROM
CLUTCH HOUSING(AL)
1. There is a plug under the clutch
housing.
2. Drain the water completely and
install the plug. Drain the water
into a container and dispose of it in
a proper manner for environment
protection.
T46OA42A
BLEEDING FUEL SYSTEM(AM)
Air must be removed:
1. When the fuel lter or lines are re-
moved.
2. When tank is completely empty.
3. After the tractor has not been used
for a long period of time.
Bleeding procedure is as follows:
1. Breed the system with the cock in
the fuel lter.
(1) Fuel Cock (A) Close
(B) Open (C) Air Bleeding
TE5O716A
2. Start the engine and run for about
30 seconds, and then stop the en-
gine.
3. Rotate the fuel cock to open posi-
tion.
TE150 (EX50, EX55)-���-07.indd 33 2019-03-19 �� 4:36:31