Daedong EX50-SA - Changing Engine Oil and Replacing Filter(L); Changing Engine Oil and Replac- Ing Filter(L)

EX50-SA / EX55-SA / EX5310-AU / EX5810-AU
7
-
14
CHANGING ENGINE OIL AND REPLACING FILTER(L)
1. Park the tractor on a level ground
and start the engine to warm it up.
2. Stop the engine, apply the parking
brake, and remove the drain plug.
3. Remove the drain plug at the bot-
tom of the engine and drain the oil
completely. All the used oil can be
drained out easily when the engine
is still warm.
Be sure to put the drain plugs to
the oil sump securely.
(1) Oil Inlet (2) Dipstick
(A) Oil level is acceptable within this range
(1) Drain Plug
T46OA09A
T46OA10A
(1) Engine Oil Filter
4. Remove the oil filter behind the
cooling fan on the right side of the
engine.
5. Apply a thin lm of oil to the O-ring
of a new filter and tighten the
O-ring rmly by hand.
6. Fill the engine oil to the specied
level and tighten the oil ller cap.
T46OA11A
TE150 (EX50, EX55)-���-07.indd 14 2019-03-19 �� 4:36:24