Daedong EX50-SA - Seat Adjustment

4
DESCRIPTION OF OPERATING SYSTEM
4
-
27
(1) Seat Adjustment Lever
SEAT ADJUSTMENT
SEAT SLIDING
To adjust the seat position, pull the
lever (1) to upward under the front of
the seat, slide the seat to the desired
position, and then release the lever.
Makesurethattheseatisrmlyxed
by moving it gently after adjustment.
•
Do not put a hand between the
seat and the slides when ad-
justing the seat position. You
can be injured unexpectedly.
CAUTION
H11O468A
SEAT BACK RECLINING
(1) Seat Back Adjustment Lever
To change the seat back angle, raise
the lever (1) on the left of the seat.
Then, adjust the seat back angle with
the lever pulled. Release the lever
after adjustment. Make sure that the
leverisreturnedandtheseatisrm-
lyxedafteradjustment.
H11O469A
•
Never Leave the driver’s seat
while the engine running.
•
Before leaving the seat, be
sure to turn off any imple-
ments which are equipped
with rotating blades such as
rotary tiller, rotary cutter, mid/
rear mower, snow blower, etc.
and turn off the engine.
WARNING
TE150 (EX50, EX55)-���-04.indd 27 2019-03-19 �� 6:58:31