Daedong EX50-SA - Slow Blow Fuse(Ap)

7
MAINTENANCE
7
-
35
H11O655A
3. If the fuse is blown, replace it with
a new fuse with same capacity.
Make sure it is rmly installed.
4. Install the fuse box cover.
•
Never use a fuse with the ca-
pacity higher than specified
on the fuse box cover.
•
If using a faulty fuse, steel
wire, or foil, the electrical de-
vice can be damaged or even
catch a re.
WARNING
•
If the replaced fuse is blown
soon, it is probable that the wir-
ing system is faulty. In this case,
contact your local
KIOTI
Dealer.
•
If the fusible link, relay or other
electrical component is faulty,
contact your local
KIOTI
Dealer.
NOTE
(1) Slow Blow Fuse
SLOW BLOW FUSE(AP)
The slow-blow fuse is to protect the
electric wiring. If it is blown, nd and
repair the cause and replace it with a
new genuine part.
Slow Blow Fuse
60A
T46OA45A
TE150 (EX50, EX55)-���-07.indd 35 2019-03-19 �� 4:36:32