Daedong EX50-SA - PRE-OPERATION

5
-
2
EX50-SA / EX55-SA / EX5310-AU / EX5810-AU
It is a good practice to know the con-
dition of your tractor before you start
it. You should do routine check be-
fore each use.
For detailed information, refer to
"Maintenance interval" in chapter 6.
PRE-OPERATION
CHECK ITEM

Walk around inspection to look for
loose or missing hardware.

Check the engine oil level.

Check the transmission oil level.

Check the coolant level.

Clean the grill and radiator screen.

Check the air cleaner lter.

Check the brake pedal.

Check all dash gauges and indica-
tors.

Check head lights, tail lights, and
all working lights.

Check accessible wiring harness
for any damage.

Check the seat belt and
ROPS
for
damage.

Check all danger and warning la-
bels.

Check fuel level.

Check all danger and warning decals.

Visually check tire inflation and
wheel bolt tightening.
•
Stop the tractor on level
ground, stop the engine, and
apply the parking brake before
checking or repairing it.
•
Refer to "Daily inspection" in
the section "Service" for fuel
replenishment.
•
Read information titled as
"Danger", "Warning", and
"Caution" thoroughly for the
safe operation.
CAUTION
TE150 (EX50, EX55)-���-05.indd 2 2019-03-19 �� 7:03:12