Daedong EX50-SA - CLEANING THE TRACTOR

EX50-SA / EX55-SA / EX5310-AU / EX5810-AU
1
-
24
• Check for correct coupling between
tow hook and trailer. See the Towing
Attachments section.
• Use ballast weight as recommend-
ed. NEVER add more ballast to
compensate a higher load than al-
lowed. Reduce load.
• Keep work surfaces and engine
compartments clean. • Before
cleaning the machine, always lower
implements to the ground, engage
the first gear, engage the parking
brake, turn the engine off and re-
move the key.
• Always use specic personal safety
devices for each service operation.
• Clean steps, pedals and oor. Re-
move grease or oil. Brush away
dust or mud. In winter, scrape away
snow and ice. Remember - slippery
surfaces are dangerous.
• Avoid using petrol, paraffin, paint
thinner etc. when cleaning plastic
parts, e.g.; console, instrument
cluster, monitors and gauges etc.
Use ONLY water, mild soap and
a soft cloth when you clean these
parts.Using petrol, paraffin, paint
thinner etc., will cause cracking
or deformation of the part being
cleaned.
• Remove and put away any tools,
buckets, chains and hooks.
CLEANING THE TRACTOR
TE150 (EX50, EX55)-���-01.indd 24 2019-03-19 �� 2:45:47