Daedong EX50-SA - Checking Wheel Bolt; Nut Torque(Q); Cleaning Fuel Filter(S)

7
MAINTENANCE
7
-
21
Check wheel bolts and nuts regu-
larly especially when new. If they are
loose, tighten them as follows.
CHECKING WHEEL BOLT / NUT TORQUE(Q)
(1) Front Wheel Bolt / Nut
(2) Rear Wheel Bolt / Nut
Item Tightening Torque
Front
wheel
Bolt
196 ~ 225 N·m
144 ~ 166 lbf·ft
20 ~ 23 kgf·m
Nut
Rear
wheel
Bolt
275 ~ 319 N·m
203 ~ 235 lbf·ft
28 ~ 32.5 kgf·m
Nut
CLEANING FUEL FILTER(S)
To avoid personal injury :
•
Never operate tractor with a
loose rim, wheel, or axle.
•
Any time bolts and nuts are
loosened, retighten to speci-
ed torque.
•
Check all bolts and nuts fre-
quently and keep them tight.
CAUTION
This job can be done in the eld but
in a clean place.
1. Close the fuel cock.
2. Unscrew the ring and remove the
filter bowl. Rinse the inside with
fresh diesel fuel or kerosene.
3. Take the lter element out and dip
it in the diesel / the kerosene to
clean.
T46OA26A
(1) Fuel Cock (2) Fuel Filter Head
(3) O-Ring (4) Filter Element
(5) Spring (6) O-Ring
(7) Filter Bowl (8) Screw Ring
(A) Close (B) Open
T46OA27A
TE150 (EX50, EX55)-���-07.indd 21 2019-03-19 �� 4:36:27