EX50-SA / EX55-SA / EX5310-AU / EX5810-AU
1
-
18
(1) Cardboard (3) Magnifying Glass
(2) Hydraulic Line
17. Make sure that wheel bolts have
been tightened to the specified
torque.
18. Escaping hydraulic fluid under
pressure has sufficient force to
penetrate skin, causing seri-
ous personal injury. Be sure to
release all residual pressure.
Before disconnecting hydraulic
lines.
Before adding pressure to the
hydraulic system, make sure that
all connections are tight and that
all lines, pipes and hoses are
free of damage.
19. Fluid escaping from pinholes may
be invisible. Do not use hands to
search for suspected leaks;
Use a piece of cardboard or
wood, instead. Use of safety
goggles or other eye protection
is also highly recommended. If
injured by escaping fluid, see a
medical doctor at once. This uid
can produce gangrene and/or
severe allergic reaction.
T66O129A T66O130A
20. Keep environmental pollution in
mind. When replacing coolant or
oil, dispose of it the right way.
Be sure to observe all relevant
regulations when you dispose of
the engine oil, transmission oil,
fuel, coolant, lters and battery.
T66O131A
TE150 (EX50, EX55)-���-01.indd 18 2019-03-19 �� 2:45:45
To Next Page
Loading...
