200
Figure 3-191
Step 2 Set parameters.
HDD full: It is to select working mode when hard disk is full. There are two options: stop recording or
rewrite.
Pack duration: It is to specify record duration. The max length is 120 minutes.
Auto delete old files:
Never: Do not auto delete old files.
Customized: input customized period here and system can auto delete corresponding old files.
The deleted file cannot be restored.
Step 3 Click Apply or Save to complete setup.
3.12.2 Schedule
It is to set schedule record and schedule snapshot. NVR can record or snapshot as you specified. For
detailed information, please refer to chapter 3.4.6.1 schedule record and 3.4.6.2 schedule snapshot.
3.12.3 HDD
It is to view and sett HDD properties and format HDD.
It is to view current HDD type, status, capacity and etc. The operation includes format HDD, and change
HDD property (read and write/read-only/redundancy).
To prevent files be overwritten in the future, you can set HDD as read-only.
To backup recorded video file, you can set HDD as redundant HDD.
Step 1 From Mani-menu->Setting->Storage->HDD Manager, you can go to HDD management interface.
See Figure 3-192.
To Next Page
Loading...
Need help?
General
