62
Enter the following interface. See Figure 3-38.
Figure 3-38
Step 2 Select the directory address and then click the OK button.
Step 3 Device pops up a dialogue box to show the export is successful. Click OK button to exit.
Note
Backup encryption is enabled by default when exporting files. The file information includes IP
address, port, remote channel number, manufacturer, user name and password.
When you enable backup encryption, the extension name of the exported file is .backup. All
the other softwares cannot open the file to edit except the NVR device.
When you disable backup encryption, the password of remote device in the exported file is
blank. The extension name of the exported file is .csv. It might lead to data leakage.
3.5.1.3 IP Import
Step 1 Click Import button.
Enter the following interface. See Figure 3-39.
To Next Page
Loading...
Need help?
General
