252
the Alarm setup interface.
Important
For multiple-channel monitor mode, system adopts extra stream to monitor by default. You can not
modify manually. All channels are trying to synchronize. Please note the synchronization effect still
depends on your network environments.
For bandwidth consideration, system can not support monitor and playback at the same time. System
auto closes monitor or playback interface when you are searching setup in the configuration interface. It
is to enhance search speed.
4.4 Reset Password
If you forgot admin password, you can reset the password by email or by answering the security
questions (local menu only).
When the password reset function is enabled, you can scan the QR code on the Web to reset the
password.
When the password reset function is disabled, you can reset password via the security questions
configured before. If the secury questions are not configured, system displays that Password reset is
closed! You need to contact the customer service for help.
Step 1 Go to the device login interface. See Figure 4-4.
Step 2 Click Forgot password.
If you have set the reserved email, system displays a notice before the password reset. See
Figure 4-13.
If you have not set the reserved email, a dialogue box pops up that asks you to reset the
password by clicking Forgot password on the local interface.
Figure 4-13
To Next Page
Loading...
Need help?
General
