80
right-click menu are for screen 1 only.
3.6.2.3 Output Screen
Click to select corresponding window-split mode and output channels.
3.6.2.4 Previous screen/next screen
Click to go back to the previous screen, click to go to the next screen.
3.6.2.5 Tour
Click button to enable tour, the icon becomes , you can see the tour is in process.
Note
Close the tour or the triggered tour operation has cancelled, device restore the previous preview video.
3.6.2.6 PTZ
Click , system goes to the PTZ control interface.
3.6.2.7 Color
Click button , system goes to the color interface. Please make sure system is in one-channel mode.
3.6.2.8 Image
Click to go to the image interface. Please make sure system is in one-channel mode.
3.6.2.9 Search
Click button
, system goes to search interface.
3.6.2.10 Broadcast
Click to go to broadcast interface. Select a group name and then click to begin
broadcast.
3.6.2.11 Alarm Status
Click button , system goes to alarm status interface. It is to view device status and channel status.
3.6.2.12 Channel Info
Click button , system goes to the channel information setup interface. It is to view information of the
corresponding channel. See Figure 3-58.
To Next Page
Loading...
Need help?
General
