75
Figure 3-49
3.5.6 Upgrade
Note
System max supports to upgrade 8 network cameras at the same time.
It is to update the network camera.
Step 1 From main menu > Setting > Camera > Remote > Upgrade, the interface is shown as below.
See Figure 3-50.
Step 2 Click Browse button and then select the upgrade file. Then select a channel (or you can select
device type filter to select several devices at the same time.)
Step 3 Click Start upgrade button to upgrade. You can see the corresponding dialogue once the
upgrade is finish.
To Next Page
Loading...
Need help?
General
