41
Figure 3-15
Step 3 Set holiday name, repeat mode and holiday mode.
Note
Click Add more to add new holiday information.
Step 4 Click Add button and you can add current holiday to the list. See Figure 3-16.
Note
 Click the dropdown list of the state and you can enable/disable holiday date.
 Click to change the holiday information. Click to delete current date.
Figure 3-16
Step 5 Click Apply button to save settings.
3.4.2 Basic Network Settings
Set device IP address, DNS (Domain Name System) information.
Preparation
Make sure the device has properly connected to the network.
Step 1 Click Next button, device goes to TCP/IP interface. See Figure 3-17.
To Next Page
Loading...
Need help?
General
