353
Figure 4-140
4.6.6.4.2 Schedule
It is to set schedule broadcast function. You can play the different audio files in the specified periods.
From main menu->Setup->System->Voice->.Schedule, you can see the following interface. See Figure
4-141.
Figure 4-141
Please refer to the following sheet for detailed information.
Parameter
Function
Period
There are six periods. Check the box to enable current setup.
Repeat
It is to set audio file repeat times in the specified period.
Interval
It is the audio file repeated interval in the specified period.
Output
port
There are two options: MIC (default)/audio. When reuse the MIC port
and bidirectional talk port, the bidirectional port has the higher priority.
Please note some series product does not support audio function.
To Next Page
Loading...
Need help?
General
