EasyManuals Logo

Dahua DHI-NVR608R-64-4KS2 User Manual

Dahua DHI-NVR608R-64-4KS2
402 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #291 background imageLoading...
Page #291 background image
275
the network.
4.6.2.1 TCP/IP
According to the network plan to set information such as IP address and DNS server.
Before configuring the network parameters, make sure that the NVR is accessing the network properly.
Step 1 Select Setup > Network > TCP/IP.
The TCP/IP interface is shown as in Figure 4-38.
Figure 4-38
Please refer to the following table for detailed information.
Parameter Description
IP Version
You can select IPv4 or IPv6. Both types are supported currently.
Note
The IP address, default getway, preferred DNS and alternate DNS for IPv6 are
128 digits. It cannot be blank.
Preferred
DNS
DNS server IP address.
Alternate
DNS
DNS server alternate IP address.
Default Card
Set according to the actual situation. It shall be in the same network segment
with the IP address.
DHCP
When the IP of default card is DHCP, DNS supports maunal setting and
DHCP. The Enable check box of DHCP is available to select.
When the IP of default card is manual, DNS only supports manual setting.
The Enable check box of DHCP is unavailable (grey).
When DHCP is enabled, DNS server address is unavailable (grey).

Table of Contents

Other manuals for Dahua DHI-NVR608R-64-4KS2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dahua DHI-NVR608R-64-4KS2 and is the answer not in the manual?

Dahua DHI-NVR608R-64-4KS2 Specifications

General IconGeneral
BrandDahua
ModelDHI-NVR608R-64-4KS2
CategoryNetwork Hardware
LanguageEnglish

Related product manuals