Dahua DHI-NVR608R-64-4KS2 User Manual

299
Figure 4-60
Step 2 Select the channel number and select the Enable check box.
Step 3 Set the parameters. For detail, see the following table or see chapter 4.6.3.4 Fire Alarm.
Parameter Description
Color Mode
The colors for the hot spot and cold spot.
 Auto: Select the color according to the current image.
 Manual: Set the customized color.
Alarm
Conditions
The condition that an alarm occurs.
 Single

Hot spot temperature higher than: An alarm occurs when the temp is
higher than the hot spot.
 Cold spot temperature less than: An alarm occurs when the temp is
lower than the cold spot.

Select both: An alarm occurs when the temp meets either of the two
conditions.
 Conbination
Only when the highest temp is higher than the hot spot and the lowest temp
is lower than the cold spot, the system triggers the alarm.

Dahua DHI-NVR608R-64-4KS2 Specifications

General

Brand	Dahua
Model	DHI-NVR608R-64-4KS2
Category	Network Hardware
Language	English