Linea Lite GigE Series Camera Operational Reference • 125
IP Configuration Status GevIPConfigurationStatus
Reports the current IP configuration status. (RO)
None None Device IP Configuration is not defined.
PersistentIP PersistentIP Device IP Address Configuration is set to
DHCP DHCP
Device IP Address Configuration is set to DHCP
(Dynamic Host Configuration Protocol). Network
requires a DHCP server.
LLA LLA Device IP Address Configuration is set to LLA
(Link-Local Address). Also known as Auto-IP.
Used for unmanaged networks including direct
connections from a device to a dedicated NIC.
ForceIP ForceIP
Device IP Address Configuration is set to
ForceIP. Used to force an IP address change.
Current IP Address GevCurrentIPAddress Reports the IP address for the given network
Current Subnet Mask GevCurrentSubnetMask Reports the subnet mask of the given interface.
(RO)
Current Default Gateway GevCurrentDefaultGateway
Reports the default gateway IP address to be
used on the given network interface. (RO)
Current IP set in LLA GevCurrentIPConfigurationLLA
Controls whether the LLA (Link Local Address) IP
configuration scheme is activated on the given
Current IP set in DHCP GevCurrentIPConfigurationDHCP Controls whether the DHCP IP configuration
scheme (Dynamic Host Configuration Protocol) is
activated on the given network interface.
Current IP set in Persistent
IP
GevCurrentIPConfigurationPersistentIP
Controls whether the PersistentIP configuration
scheme is activated on the given network
Primary Application IP
GevPrimaryApplicationIPAddress
Returns the IP address of the device hosting the
primary application. (RO)
Device Access Privilege
Control
deviceCCP
Controls the device access privilege of an
application.
DFNC
Exclusive Access ExclusiveAccess
Grants exclusive access to the device to an
application. No other application can control or
monitor the device.
Control Access ControlAccess Grants control access to the device to an
application. No other application can control the
Current Heartbeat Timeout GevHeartbeatTimeout
Indicates the current heartbeat timeout in
GVCP Heartbeat Disable GevGVCPHeartbeatDisable Disables the GVCP (GigE Vision Control Protocol)
heartbeat monitor. This allows control
switchover to an application on another device.
Communication Timeout (in
GevMCTT Provides the transmission timeout value in
Communication
Retransmissions Count
GevMCRC
Indicates the number of retransmissions allowed
when a message channel message times out.
Fire Test Packet GevSCPSFireTestPacket When this feature is set to True, the device will
MAC Address GevMACAddress MAC address of the network interface. (RO)
Current Camera IP
Configuration
GevCurrentIPConfiguration
Current camera IP configuration of the selected
interface. (RO)
DHCP DHCP Dynamic Host Configuration Protocol Mode.
Network requires a DHCP server.
PersistentIP PersistentIP Persistent IP Mode (static).
Persistent IP Address GevPersistentIPAddress
Persistent IP address for the selected interface.
This is the IP address the camera uses when
booting in Persistent IP mode.