Dalsa Linea Lite GigE Series - Linea Lite Gige Application Advantages; Linea Lite Gige Firmware

6 • Linea Lite GigE Series Overview Linea Lite GigE Series Camera
Linea Lite GigE Application Advantages
• Available in 2048 and 4096 pixel line resolution
• 8 or 12-bit output
• Up to 64 kHz burst line rate
• 2 stage TDI (mono)
• Flat Field Correction
• Power over Ethernet (PoE) or Camera power via HD15 GPIO connector
• Configurable GPIO ports, timers and counters
• 2 general purpose inputs with programmable termination
• 2 general purpose outputs
• 1 general purpose programmable input / output
• Counter, Timer and Events available to support imaging applications
• Supports IEEE1588-2008 (PTP: Precise Time Protocol) for multiple camera synchronization
• Multicast and Action Command supported
• Optimized, rugged design
• GigE Vision 1.2 compliant
• Gigabit Ethernet (GigE) interconnection to a computer via standard CAT5e or CAT6 cable
• Supports connection to the host computer NIC through a GigE network switch
• Gigabit Ethernet (GigE) transfer speed up to 115 MB/second
• Native Trigger-to-Image Reliability design
• Visual status LED on camera back plate
• Supported by Sapera™ LT software libraries
• Support for end-of-frame Metadata
• Digital horizontal and vertical binning for increased sensitivity
• 1 µs internal timer or external events can timestamp images
• Provides 4 User Settings sets to store and recall camera configurations
• Refer to Operation Reference and Technical Specifications section of the manual for full
details.
Linea Lite GigE Firmware
Teledyne DALSA Linea Lite GigE camera firmware contains open source software provided under
different open source software licenses. Information about these open source licenses can be found
in the documentation that accompanies the firmware available on the Teledyne DALSA website at
www.teledynedalsa.com
.
Firmware updates for Linea Lite GigE are available for download from the Teledyne DALSA web site
[http://www.teledynedalsa.com/imaging/support/downloads/firmware/
]. Choose Linea Lite GigE
Firmware from the available download sections, then choose the zip file download specific to your
camera model. Update the camera firmware using CamExpert (see
File Access via the CamExpert
Tool).
When using Sapera LT, update the camera firmware using CamExpert (see File Access via the
CamExpert Tool). The Camera firmware can be easily upgraded / downgraded within your
application.